Removing and Cleaning Soap Scum
Tips For Removing Soap Scum
Cleaning Soap Scum
The soap scum left in the shower or the bath tub makes it less relaxing.
There are plenty of people that have no idea how to actually get rid of it though. That’s because soap scum can not be removed easily with just a natural rinsing of the bath tub. Instead, you will need to follow a few additional steps.
The goal is to have a nice, clean bathroom that you do not mind allowing your visitors to go to.
To get rid of the soap scum gray ring that is around your bath tub, you need to pay particular attention to it. It will likely build up, shower after shower and this makes it very difficult to clean off. Therefore, you’ll want to make sure that you tackle the shower and tub cleaning as often as you can to keep the scum from setting there.
Tips For Cleaning
- You should take the time to wipe down the scum off of your tub or your shower after you get out of it. You should make sure to wipe down the sides and the bottom. This will make for the easiest method of cleaning up soap scum.
- You can apply a layer of furniture wax or polish to the walls of the shower and tub to help keep the soap scum from sticking to it. You should only do this once you have the entire thing cleaned first.
- Mix one part ammonia with two parts water. Spray this solution onto the location and then wipe clean. You may need to rinse down the area thoroughly afterwards.
- Warm up about two cups of vinegar slightly in your microwave. Pour it into a spray bottle. Spray directly onto the soap scum and allow it to work for a minute or so. You can usually wipe it clean within minutes.
- Use a dryer sheet. You can rub these sheets right onto the walls and they will help to remove the scum.
- If you chose to go with a commercial product for cleaning the soap scum from your bathroom walls, you’ll want to make sure that you read the directions. Follow them as described for the best results. Using too much or too little will not allow for the best results.
Its important to invest some time in keeping your shower and tub clean from soap scum. This is due in part to the fact of what is actually in that grime that is on your walls. For starters, it has soap in it. Yet, it has more including your body oils and bacteria as well. If you allow this to sit on your walls for too long, it will help to encourage the growth of mildew and mold.
Of course, this makes for a very difficult mess to clean up and one that is dangerous for your family’s health.
More Tips For Soap Scum Removal
If you find that the other remedies provide for cleaning your soap scum bathroom do not work, you’ll want to consider a few more options. You will find that there are plenty of products on the market that can work. But, do not fret if one does not work. Chances are the more thick and longer sitting the scum is, the more difficult it will be to clean off.
Below you will find a few more helpful tips about removing soap scum and a recipe for another solution to keep it clean.
Here are some more tips:
Lemon oil:
You can use this, which is a furniture oil, to help remove and keep soap scum from building up in your bathroom shower or tub. Apply it with an acrylic scrub sponge. You will then wipe it away with the help of a clean, terry cloth.
Borax
Use Borax which is a cleaning agent, scouring powder. Use a sponge to scrub the scum off with this cleaner. It is safer to use than other chemicals on the market.
Always rinse the area down with hot water afterwards. Be careful not to put oils on the floor of these showers and tubs as it will cause you to slip.
Here’s a formula for a good soap scum remover. You can use it to help you to clean the grout, tiles and the soap scum from your shower or your tub.
- 1/2 cup of baking soda
- 1/3 cup of ammonia
- 1/4 cup of white vinegar
- 6 cups of water
Mix these together in a spray bottle. Do not mix bleach in with this product. Apply to the area and then scrub with a sponge or with a terry cloth. You do not need to rinse it off.



